Epoxy Color Sand
Self-Leveling Coating

1. Product Overview

This product adopts a solvent-free formula, with epoxy resin as the film-forming base material, combined with modified curing agent, reactive diluent, colored quartz sand and functional additives. It combines decoration and functionality to form a seamless integrated colored sand floor, suitable for places with high requirements for cleanliness, wear resistance and aesthetics.

Core Features

Eco-friendly: Water-based, low-VOC, environmentally friendly coating.;
Excellent Performance: Wear-resistant, chemical corrosion-resistant (acid/alkali/oil), anti-slip, waterproof, strong adhesion;
Easy Construction: Good self-leveling property, one-time forming, seamless and easy to clean.

Application Scope

Industrial Field: Pharmaceutical GMP workshops, electronic clean rooms, food factories, auto 4S shops;
Commercial Field: Exhibition halls, hotel lobbies, shopping malls, offices;
Public Field: Hospitals, schools, underground parking lots, libraries.

2. Technical Parameters

Basic Parameters

Parameter Item	Index Value
Mixing Ratio (Part A : Part B)	12:1 (by weight)
Pot Life	20 min
Volatile Organic Compound (VOC) Content (g/L)	≤60
Color	Various colors (customizable)

Drying Time (Substrate Temperature)

Substrate Temp (°C)	Touch Dry (h)	Hard Dry (h)	Full Cure (d)
35	≤4	≤8	≤1
25	≤6	≤12	≤2
15	≤6	≤12	≤2
5	≤8	≤24	≤3

Performance Indicators (After 7 days curing at 25°C)

Parameter Item	Index Value
Pencil Hardness (Scratch Resistance)	8H
Abrasion Resistance (750g/500r)	≤0.030
Adhesion Strength	≥2 MPa
Compressive Strength	≥80 MPa
Flexural strength	>30 MPa
Resistance to 20% H₂SO₄ (48h)	No blistering, no peeling, slight discoloration
Resistance to 20% NaOH (72h)	No blistering, no peeling, no discoloration
Oil Resistance (120# Solvent Gasoline, 72h)	No blistering, no peeling, no discoloration
Impact Resistance	50 kg·cm (No crack)

3. Construction Methods

1. Substrate Preparation

Grinding: Use dust-free grinder to remove concrete slurry and oil, expose hard substrate;
Repair: Fill cracks and holes;
Cleaning: Remove dust with industrial vacuum cleaner, ensure substrate is dry (moisture content ≤8%) and flat (flatness ≤2mm/2m).

2. Seal Primer Construction

Application Method: Ready-to-use. Apply directly without mixing or dilution.
Construction: Roller coating or troweling, dosage: 0.125 kg/m²;
Requirement: Fully seal substrate pores, enhance adhesion, drying time (25°C) about 6h.

3. Top Coat Construction

Application Method: Ready-to-use. Apply directly without mixing or dilution.
Construction: Roller coating or troweling, dosage: 0.125 kg/m²;
Requirement: Fully seal substrate pores, enhance adhesion, drying time (25°C) about 6h.

4. Notes

Construction Environment: Temperature ≥5°C, humidity ≤85%; curing is slow below 5°C;
Material Mixing: Prepare on-site, stir evenly, use up within pot life (avoid gel waste);
Safety Protection: Wear gloves, masks and goggles during construction, keep good ventilation;
Substrate Requirements: Ensure moisture content ≤8% and flatness up to standard, otherwise delamination and bubbles may occur;
Maintenance Management: Forbid walking before curing, put into use after full curing;
Storage Taboos: Avoid contact with water, strictly prohibit mixing impurities.

5. Storage & Transportation

Storage: Store in cool and dry place (5-35°C), sealed;
Shelf Life: 12 months (unopened);
Transportation: Non-dangerous goods transport, avoid exposure to sun and rain.
Safety Statement: This product is a chemical, avoid contact with skin/eyes; if contact occurs, rinse immediately with clean water and seek medical attention; keep away from fire sources, dispose of waste according to local regulations.

Remarks: This TDS data is based on laboratory tests, actual construction should be adjusted according to on-site conditions. For more details, please consult technical support.

Epoxy Color Sand Self-Leveling Coating